Bộ phát wifi 6 trong nhà 802.11ax Cisco Catalyst C9115AXI-S hai băng tần, sử dụng antenna trong 4x4 MU-MIMO cho tốc độ tối đa 5.38 Gbps ở mode 802.11ax, domain Việt Nam.
✓ Báo Giá Tốt Nhất 2022
✓ Giảm 60-70% So Với Giá List
✓ Hỗ Trợ Dự Án và Đại Lý
✓ Hàng Chính Hãng Đầy Đủ CO CQ
✓ 1 Đổi 1 Với Lỗi Kỹ Thuật
✓ Bảo Hành, Đổi Trả Nhanh Chóng
✓ Hỗ Trợ Cấu Hình Lắp Đặt
✓ Tư Vấn Nhiệt Tình, Chính Xác
✓ Giao Hàng Trên Toàn Quốc
- Tầng 2, NTT03 Thống Nhất Complex, 82 Nguyễn Tuân, Thanh Xuân, Hà Nội. - Tầng 2, Số 31B Đường số 1, An Phú, Quận 2, TP HCM.Cisco Part Number |
:
|
List Price |
: $
|
Giá bán |
:
|
Bảo hành |
:
|
Made In |
:
|
Stock |
:
|
Item | Specification |
Part numbers | Cisco Catalyst 9115AXI Access Point: Indoor environments, with internal antennas |
Software | Cisco Unified Wireless Network Software Release 8.9 or later |
Cisco IOS® XE Software Release 16.11 or later | |
Supported wireless LAN controllers | Cisco Catalyst 9800 Series Wireless Controllers |
Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller | |
802.11n version 2.0 (and related) capabilities | 4x4 MIMO with four spatial streams |
Maximal Ratio Combining (MRC) | |
802.11n and 802.11a/g beamforming | |
20- and 40-MHz channels | |
PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) | |
Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) | |
802.11 Dynamic Frequency Selection (DFS) | |
Cyclic Shift Diversity (CSD) support | |
802.11ac | 4x4 downlink MU-MIMO with four spatial streams |
MRC | |
802.11ac beamforming | |
20-, 40-, 80-, and 160-MHz channels | |
PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz) | |
Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) | |
802.11 DFS | |
CSD support | |
802.11ax | 4x4 downlink MU-MIMO with four spatial streams |
Uplink/downlink OFDMA | |
TWT | |
BSS coloring | |
MRC | |
802.11ax beamforming | |
20-, 40-, 80-, and 160-MHz channels | |
PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz) | |
Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) | |
802.11 DFS | |
CSD support | |
Integrated antenna | 2.4 GHz, peak gain 3 dBi, internal antenna, omnidirectional in azimuth |
5 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth | |
External antenna (sold separately) | Cisco Catalyst 9115E Access Points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz) |
Cisco offers the industry's broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios | |
For more details, C9115 Guide | |
Interfaces | 1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz |
Management console port (RJ-45) | |
USB 2.0 | |
Indicators | Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors |
Dimensions (W x L x H) | Access point (without mounting brackets): C9115I: 8.0 x 8.0 x 1.5 in. (20.3 x 20.3 x 3.8 cm), C9115E: 8.0 x 8.0 x 1.7 in. (20.3 x 20.3 x 4.3 cm) |
Weight | 1.98 lb (0.9 kg) |
Input power requirements | 802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE®) |
Cisco power injector, AIR-PWRINJ6= | |
802.3af PoE | |
Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af) | |
Environmental | Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) Nonoperating (storage) altitude test: 25˚C, 15,000 ft. Operating temperature: 32° to 122°F (0° to 50°C) Operating humidity: 10% to 90% (noncondensing) Operating altitude test: 40˚C, 9843 ft. |
Tư vấn - Nhận Xét - Đánh Giá Về Sản Phẩm: C9115AXI-S ?